[clif] Re: Issue to deploy a probe in a distant server.

["Jérôme Soulier" <jerome.soulier@xxxxxx>]

Thanks very much all of you for your quick and clear answer :)

My issue is solve.

 Best regards.

Jérôme

2008/3/28, Thomas Escalle <thomas.escalle@xxxxxxxxxxxxxxxxxx>:

Hello Jérôme,

To solve your problem you have to edit the clif.props file present on
your remote server in the etc repertory.
When editing this file you have to add this two lines :

-Djonathan.connectionfactory.host=192.168.1.0/24 \
-Dclif.filestorage.host=192.168.1.0/24 \

You can add these lines just after the following line :

-Dclif.isac.jobdelay=-1 \

Be carreful if you use the "ant config" task because this task copy the
clif.props.template file in clif.props changing hostname and the code
server parameters. So if you use the "ant config" task you also have to
add these lines in the clif.props.template file.

Best regards.

Thomas.


Jérôme Soulier a écrit :

> Hello,
>
> I apologise for my bad English, and i will try to be as clear as possible.
>
> So i have some trouble to deploy my probe an a local network with CLIF.
>
> In fact, My registry is running, and all my server are running and my
> registry see them...
>
> My issue is that when i try to deploy a blade on a distant server, the
> deploying stop without any error message.
>
> Does anybody have already solve this issue ?
>
> Thanks in advance,
>
> Here are my configuration :
>
> Registry :
>
> Carte Ethernet Connexion au réseau local:
>
>         Suffixe DNS propre à la connexion :
>         Description . . . . . . . . . . . : Intel(R) PRO/1000 MT
> Mobile Connection
>         Adresse physique . . . . . . . . .: 00-08-0D-F6-B0-36
>         DHCP activé. . . . . . . . . . . : Non
>         Adresse IP. . . . . . . . . . . . : 192.168.1.7

> <http://192.168.1.7>

>         Masque de sous-réseau . . . . . . : 255.255.255.0

> <http://255.255.255.0>

>         Passerelle par défaut . . . . . . :
>
> Server :
>
> eth0      Link encap:Ethernet  HWaddr 00:0C:76:22:5A:96

>           inet adr:192.168.1.2 <http://192.168.1.2>
> Bcast:192.168.1.255 <http://192.168.1.255>  Masque:255.255.255.0
> <http://255.255.255.0>

>           adr inet6: fe80::20c:76ff:fe22:5a96/64 Scope:Lien
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:2238 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 lg file transmission:1000
>           RX bytes:233804 (228.3 KiB)  TX bytes:43523 (42.5 KiB)
>           Adresse de base:0xc800 Mémoire:dfd80000-dfda0000
>
> eth1      Link encap:Ethernet  HWaddr 00:04:75:EA:FB:AF

>           inet adr:192.168.32.2 <http://192.168.32.2>
> Bcast:192.168.47.255 <http://192.168.47.255>  Masque:255.255.240.0
> <http://255.255.240.0>

>           adr inet6: fe80::204:75ff:feea:fbaf/64 Scope:Lien
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:44025 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:4332 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 lg file transmission:1000
>           RX bytes:5268446 (5.0 MiB)  TX bytes:1019871 (995.9 KiB)
>           Interruption:16 Adresse de base:0x6f80
>
> eth1:1    Link encap:Ethernet  HWaddr 00:04:75:EA:FB:AF

>           inet adr:192.168.32.3 <http://192.168.32.3>
> Bcast:192.168.47.255 <http://192.168.47.255>  Masque:255.255.240.0
> <http://255.255.240.0>

>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           Interruption:16 Adresse de base:0x6f80
>
> --
> Jérôme SOULIER
> Elève Ingénieur ESEO
> Systèmes d'Informations, Réseaux et Télécoms.
> +33(6) 68 10 19 85

-- 
Jérôme SOULIER
Elève Ingénieur ESEO
Systèmes d'Informations, Réseaux et Télécoms.
+33(6) 68 10 19 85